Tech News
Back to home
Technology

Redditor quoted absurd $11,000 labor fee for $4,000 PC build — bemused customer questions $6,300 labor, $4,700 pre-project labor, and $4,000 cancellation fee

Source

Tom's Hardware

Published

TL;DR

AI Generated

A Redditor was quoted an $11,000 labor fee for a $3,849 PC build, leading to a total cost of nearly $15,000. The invoice included charges for four weeks of labor to build the PC, which many found excessive. Additionally, there were charges for three weeks of pre-production labor and inflated prices for individual parts. The situation sparked accusations of scamming and raised questions about the value of boutique PC builders compared to mainstream options.

Read Full Article

Similar Articles

Win a prize by entering your build into the inaugural Tom's Hardware Rig Rundown — submit a build to get your setup evaluated by our expert staff

Win a prize by entering your build into the inaugural Tom's Hardware Rig Rundown — submit a build to get your setup evaluated by our expert staff

Tom's Hardware is hosting the Rig Rundown, inviting readers to submit their unique PC builds for evaluation by the expert staff. Whether it's a complex multi-monitor setup or a simple but special build, all submissions are welcome. Participants can share details about their builds and why they are proud of them. The best entries will be shortlisted and reviewed by Tom's Hardware experts, with one lucky winner receiving a $100/£75 Amazon Gift Card. Submissions close on April 4, 2026, at 00:00 GMT.

Tom's Hardware•
Building in the Thermaltake Tower 250 made me furious about one design flaw that could be easily solved — cramped cable cut-outs and inaccessible I/O

Building in the Thermaltake Tower 250 made me furious about one design flaw that could be easily solved — cramped cable cut-outs and inaccessible I/O

The author recounts building a PC in the Thermaltake Tower 250 case, which features a unique design with rotated motherboard placement. However, they encountered frustration due to cramped cable cut-outs and difficult access to the I/O ports at the top of the case. Despite the case's overall good design and ease of assembly, the inconvenient cable management and limited I/O access posed significant challenges during the build process. The article suggests that a detachable shroud or wider cut-out could greatly improve cable management and accessibility in the Thermaltake Tower 250.

Tom's Hardware•
Silverstone's retro PC FLP02 case launches — throw-back 5.25-inch expansion bays meet modern 360mm radiator support, likely to be $240 in the US

Silverstone's retro PC FLP02 case launches — throw-back 5.25-inch expansion bays meet modern 360mm radiator support, likely to be $240 in the US

Silverstone has released the FLP02 retro-inspired PC case, featuring a beige color reminiscent of older designs. The case supports modern components and includes features like 5.25-inch expansion bays and space for large graphics cards and power supplies. It offers various cooling options, including support for radiators and air coolers. The FLP02 also includes a fan controller, turbo button, and key lock for added functionality. Priced around $240 in the U.S., it will be available in the fourth quarter of the year.

Tom's Hardware•
SemiEngineering

The Evolution of DRAM

DRAM, a technology dating back to 1966, still relies on the fundamental 1T 1C bit cell architecture, but advancements are underway to enhance its data storage and retrieval capabilities. Steve Woo from Rambus discusses the workings of DRAM, the variety of flavors available, the challenges of cooling denser configurations, and the ongoing concerns regarding data security. These developments mark the evolution of DRAM as it adapts to the increasing demands for faster and more efficient data processing.

SemiEngineering•

We use cookies

We use cookies to ensure you get the best experience on our website. For more information on how we use cookies, please see our cookie policy.